• The booster pump intake high TDS Saline water from raw water tank, raw water can be river and underground Well Water, or city water, or Industry Brackish water，

• Pretreatment Filter, Multi-media Filter, Activated Carbon Filter, Softener Filter, Cartridge Filter, according to input water quality, choose different optional pretreatment system.

• Firstly it will do the flush of pretreatment filter and Industrial RO system, remove the dirty or deposit contaminants inside.

• Secondly, operation of RO System making clean water. RO Semi-permeable membrane with pores ~0.0001 microns, which are very efficient, being capable of removing up to 95 – 99% of the contaminants (TDS) in the water.

• CIP (Clean-in-Place) for  RO Systems, It removes fouling (organic, biological, or particulate) and scaling (mineral deposits).

Hinada provide the truly integrated solution to water and wastewater project, from designation, supplying, installation support and commissioning to training.

The post Industrial RO System Operation Process for drinking or industry application appeared first on Hinada.

Widely considered one of the most effective water filtration methods, reverse osmosis (RO) creates clean, great-tasting water. RO systems are used in a variety of applications, including filtration for whole drinking, clean machinery, produce consumables, wash packaging, and process parts, reverse osmosis systems are used in many industries. The main sectors that use these systems include:

• Agriculture irrigation
• Pharmaceutical or medicine
• Industrial applications
• Food and beverage industries

• No matter what kind of water you start out with, there is likely an RO system that will suit your needs. Below you will find what reverse osmosis systems are, how they are beneficial, and what they are used for.
  Here are some of the most common applications of reverse osmosis systems in industrial processes, Municipal Water Purification, Desalination of Seawater, Desalination of Brackish Water, Boiler Feed Water, Wastewater Treatment application.
• What is reverse osmosis?Reverse osmosis is a multi-stage water treatment process that removes contaminants from unfiltered water, or feed water, when pressure forces it through a semipermeable membrane. Residential reverse osmosis systems utilize at least three stages of treatment to reduce levels of virtually all contaminant types. In the final stage, the RO membrane, water flows from the more concentrated side (more contaminants) of the membrane to the less concentrated side (fewer contaminants) to provide clean drinking water. The fresh water produced is called the permeate. The concentrated water left over is called the waste or brine.How does reverse osmosis work?Reverse osmosis utilizes a semipermeable membrane with very small pores that traps contaminants while water is pushed through. In osmosis, water becomes more concentrated as it passes through the membrane to obtain equilibrium on both sides. Reverse osmosis, however, blocks contaminants from entering the less concentrated side of the membrane. For example, when pressure is applied to a volume of saltwater during reverse osmosis, the salt is left behind and only clean water flows through.RO systems are widely regarded as powerful and demanding in the industrial market, due to their powerful water purification abilities. Most companies bring top-rated Industrial RO System for water plants, except for Hinada Company that brings RO systems for cheap. It brings in state of the art technologically implemented RO systems with Feed Water Pump, Pretreatment filter that includes variants of multi-media filter or premium activated carbon filter or a usual high performance soften system. Hinada’s RO system in typical water Treatment Plant uses rated PH dosing system, Cartridge filters, CIP clean systems, and other high-profile modules to render water completely pure. Thus, Hinada is your best option to buy RO systems, even at low prices.

The post What Is a Reverse Osmosis System and How Does It Work? appeared first on Hinada.

Seawater desalination system though is the operative way to remove salts from ocean water but it can’t be used at the large-scale because it is quite expensive & is also hazardous for the living organisms. Thus, this makes for the need to find out ways to desalinate seawater. The new way to desalinate water has developed known as shock electrodialysis, & not only removes salt but chemicals & bacteria present in water. Shock electrodialysis is able of offering with the more well-organized water purification system. It uses meaningfully less energy in comparison to traditional desalination methods but has the limitation on rate at which water can pass via membrane.

Seawater desalination is rapidly rising like one of the most vital new resources of freshwater for developed & some areas of developing world, significantly raising overall the energy intensity, potential climate impact & cost of the water supplies. This dramatic up scaling of industry is happening in opposition to the backdrop of the unsettled questions on possible ecological impacts of the great scale processing of the seawater habitat & liberation of rising volumes of the intense brine wastes.

Where seawater documented desalination to be the part of meeting the real water need in the most cost-efficient & least harmful way, constructed & operated to best diminish, desalination plants need sited, or alleviate their ecological impacts. You can get best quality seawater desalination plants installed at your place from Hinada which is one of the leaders in the advanced water purification systems in China.

The post Seawater Desalination System – Get Fresh & Pure Drinking Water appeared first on Hinada.

The Control System has Scimens PLC and Touch Screen.

This Booster Pump water intake from raw water tank, enter into Sand/ Carbon Filter with automatical controller, and softener with generation brine tank refill, the softener will be used for raw water with high hardness, The effluent from Softener then enter into cartridge filter with 5micron as good pretreatment of RO system.

The frist stage RO high pressure pump, with 1.3MPa working pressure, 2 units brackish RO 8040 Membrane, design recovery rate at 70%, that the capacity will be around 1.4m3/Hour.

Hinada is the leading manufacturer of RO System and High purity EDI System.

The 2nd stage RO System, high pressure pump, with 1.1MPa working pressure, 2 units low pressure RO 8040 Membrane, design recovery rate at 90%, that the capacity will be around 1.26m3/Hour, and the concentration water can return to 1st RO System input raw water tank.

The EDI System for making high purity water, the EDI feed water Conductivity: ≤10μ S/cm, and resistivity of permeate water ≥15.2MΩ.cm, the concentration of EDI system can return to 1st RO System tank.

The post 2 stage RO System with EDI System for Cosmetics factory application appeared first on Hinada.

Drinking the safety, healthy and good taste water is a major factor in the enjoyment. Today we are going to show you the 250m3/day Integrated Drinking Water RO System in Containerized.

This industry RO System for treating river water to drinking application, you can see this water dispenser will be installed in different office building floors, each floor designed one set.

Now let’s go and see the inside of Containerized RO System

Self-priming pump, boosting the water from primary tank to this Containerized RO System.

Multimedia Sand Filter, to effectively remove suspended solids, organic matter, colloidal particles, microorganisms.

This Activated Carbon Filter, it can absorb the residual chlorine, removal effects on bad odor smelly, colloid and colors.

This Cartridge Filter, with accuracy 5um as pretreatment system.

This 250m3/day RO System, it has 15sets of 8-inch RO Membrane,

It can remove particles, colloids, organic impurities, heavy metal ions, harmful bacteria substances and 99% dissolved salts.

From here the clean water will flow to UV Disinfection, then stored in this stainless 304 pure water tank.

This Water Supply system, pumping the water to different water dispenser or faucet of household.

Water is Life

For our healthy water, Choose Hinada’s water equipment or solution, thanks.

The post 250m3/Day Integrated Drinking Water RO System In Containerized appeared first on Hinada.

The RO System 2000LPH is for drinking water purpose application, the input raw water underground well water.

2 sets of RO System 2000LPH Commissioning Test video

With the treatment process: Dosing system——-Reaction Tank (Aeration)——Sedimentation Tank——PH Adjust——-Silicon Sand Filter—–Activated Carbon Filter—–Softener——-Cartridge Filter——–RO System——-UV Disinfection Because the input raw water has high percentage of CaCO3.
Hinada is the leading manufacturer of RO System and Solution provider.

Water described as “hard” contains high amounts of calcium and magnesium, which are naturally found in the Earth’s crust. Total hardness is the sum of the calcium and magnesium concentrations, both expressed as calcium carbonate, in milligrams per liter (mg/L). You can determine your water’s hardness based on these concentrations of calcium carbonate.
Table 1 Hardness of Water

Hard water can cause scale on reverse osmosis treatment membranes and ultraviolet light bulbs, which can make treatment less effective. membrane manufacturers will often specify what the maximum hardness concentration can be, but the industry rule of thumb is that hardness should not exceed 120 to 170 mg/L.

The post RO System 2000LPH Commissioning Test appeared first on Hinada.

This RO System with the capacity of 1000liters/hour will be shipped to Lebanon. Here we are going to give a brief introduction on how to install and test this RO System when you get it from Hinada.

First of all, prepare a good installation site （indoor space is better) for this RO System.

Secondly Install the input/output pipeline, and electrical cable according to our drawing.

Thirdly, test all the pumps, valves, and water level detectors manually, and check the RO module and pipeline are all in good condition and working properly. Fourthly, Sets the sand and activated carbon filter controller backwashing once or twice every 2 days (according to the manual of the Controller). The softener resin regeneration frequency needs to be calculated according to the hardness and capacity of inlet water, one or two times per day.

Fifthly, set this RO System running automatically, do maintenance, and replace the filter element regularly.

Hinada is the leading manufacturer of RO systems, any questions about your drinking water or water treatment solutions please contact us.

The post RO System Installation Steps appeared first on Hinada.

This RO System with the capacity of 1000LPH will be shipping to Lebanon, today we will talk about the main parts and functions of it

This Booster Pump, Feeding the raw water from the Primary tank to this RO System

This Silicon Sand Filter is for removing the suspended and big particles.

This Activated carbon Filter is for removing smelly and colors.

This Softener Filter is designed for the high hardness input water, which lowers the calcium and magnesium

In this 5micron cartridge filter as Microfiltration, water follows this High-pressure pump and enters into RO Membrane, The pore size of the RO membrane is 0.0001 micron, which removes 99.5% of TDS.

This Automictically control panel, permeate conductivity meter, pure water flow meter, concentration water flow meter, and ball-valve for adjusting the ratio of pure water and discharge water.

The post Introduction of RO System appeared first on Hinada.

The post Why should we drink filtered water appeared first on Hinada.

The post 15m3/Hour 2 Stage of RO System Pure Water Equipment Commissioning Video appeared first on Hinada.